Current Generator  Single-phase  1200VA  AC-DC  10V  120A

AC-DC current generator 1200VA 10V-120A

Réf : poc-1200-ac-dc-10v-120a

• Linear technology
• Current regulation or voltage regulation
• Suitable for any application that requires an accurate and stable output, including when there is a load impedance variation
• 0-24V insulated digital bus for a use controlled by a PLC on a production line
• Several generators can be connected in parallel to increase the output current (in current regulation)
• Entirely self-sufficient thanks to its touch-screen command card, can be remotely controlled via Ethernet, SCPI or RS232
• APPLICATIONS ➢ normative test of breakers ➢ endurance test ➢ current relays test ➢ calibration of current sensors...

Current Generator  Single-phase  1500VA  AC  2V  650A

AC current generator 1500VA 2V-650A

Réf : poc-1500-ac-2v-650a

• Linear technology: very large bandwith, very low distortion, almost no electrical pollution
• Current regulation
• Suitable for any application that requires an accurate and stable output, including when there is a load impedance variation
• Includes a “Pilot” signal input and can be used as an amplifier operating in current regulation
• Several generators can be connected in parallel to increase the output current
• Entirely self-sufficient thanks to its touch-screen command card, can also be remotely controlled via Ethernet, ASCII on a RS232 link
• APPLICATIONS ➢ generation of magnetic field ➢calibration of current sensors and wattmeter ➢ endurance test ➢ normative tests of breakers...

Current Generator  Single-phase  1500  AC  15V  100A

AC current generator 1500VA 15V-100A

Réf : poc-1500-ac-15v-100a

• Linear technology
• Wide range of current AC
• Current regulation
• Includes a “Pilot” signal input and can be used as an amplifier operating in current regulation
• Several generators can be connected in parallel to increase the output current
• Entirely self-sufficient thanks to its touch-screen command card, it also can be remotely controlled via Ethernet, ASCII or RS232
• APPLICATION ➢ emulation of AC grid, current sensors test, any application that requires an accurate and stable output, including when there is a load impedance variation

Current Generator  Single-phase  1500VA  AC  8V  12,5A

AC modular current generator 100VA 8V-12.5A

Réf : poc-2x100-3x100-ac-8v-12.5a-2g

• Linear technology: large bandwidth, very low distortion
• Command card with a touchscreen for local control, RS232 or Ethernet for remote control
• The generator is a rack equipped of one to three current amplifier modules
• Each amplifier operates in current regulation
• APPLICATIONS ➢ grid emulation ➢ sensors test

Current Generator  Single-phase  2500VA  DC  5V  500A

DC current generator 2500VA 5V-500A

Réf : poc-2500-dc-500a-5v

• AC to DC converter regulated in current
• Can be paralleled with up to 20 others to create any type of network in the 0-24,000 ADC range
• Insulated analog output image of the current, this generator can be used in a PHIL system (Power Hardware In the Loop)
• With permanent measurements of voltage, current, temperature of power components, this generator is tolerant to severe conditions of use and particularly suitable for use in laboratory
• Combined with a touch-screen control rack, this generator can be remote by Ethernet or RS 485 buses using TCP/IP and ModBus protocols
• APPLICATIONS ➢ normative tests of breakers ➢ endurance tests ➢ current relays tests ➢ calibration of current sensor and wattmeter ➢ generation of magnetic field

Current Generator  Single-phase  1200VA  DC  6V  200A

DC current generator 1200VA 6V-200A

Réf : poc-1200-dc-6v-200a

• Used to measure contact resistance
• Switching technology
• Touchscreen width 5,7’’ for local control
• Two communications links for a remote control: RS232 and Ethernet
• It is possible to connect up to 3 generators in parallel to increase max current: up to 400 A with two generators, up to 600 A with three generators

Current Generator  Single-phase  1500VA  AC-DC  28V  32A

AC-DC differential current generator 1500VA 28V-32A

Réf : pocdif

• ”POCDIF” is a versatile current generator
• Used in qualification or production process
• To optimize performance and industrial efficiency, the system is modular. The architecture separates the functions on different modules installed in a rack which width is 19 inches. They are easily interchangeable
• Completely autonomous using its local control by touchscreen, it can be controlled remotely from a supervisor system via an Ethernet, RS232 or RS485 link
• Several racks can be synchronized through digital links to increase the output current or provide a three-phase system
• APPLICATIONS ➢ Tests of differential circuit breakers ➢ Tests of differential switches ➢ Insulated current generator ➢ Tests according to IEC61008, IEC61009, NF62411/62412, NF EN 62423 (type F, B), DIN VDE 0664-400 (type B+), ÖVE/ÖNORM E 8601 (type G) IEC 62752, IEC62955

Current Generator  Single-phase  6000VA  AC  260V  600A

AC current generator 6000VA 260V-600A 8 ranges

Réf : poc-6000-ac-260v-600a-8g

• Linear technology. It generates almost no electrical pollution and can be used in anechoic chamber.
• Current regulation or voltage regulation
• Its 0-24V insulated digital bus allows a use directly controlled by a PLC on a production line
• Several generators can be connected in parallel to increase the output current (in current regulation)
• Entirely self-sufficient thanks to its touchscreen command card, can be remotely controlled via Ethernet, SCPI or RS232
• APPLICATIONS ➢ test of breakers ➢ endurance test ➢ current relays test ➢ calibration of current sensors...

Current Generator  Single-phase  1500VA  AC  7V  200A

AC current generator 1500VA 7V-200A

Réf : poc-1500-ac-7v-200a

• Linear technology
• Current regulation
• Suitable for any application that requires an accurate and stable output, including when there is a load impedance variation
• Includes a “Pilot” signal input and can be used as an amplifier operating in current regulation.
• Several generators can be connected in parallel to increase the output current
• Entirely self-sufficient thanks to its touch-screen control, can also can be remotely controlled via Ethernet, ASCII or RS232
• APPLICATIONS ➢ breakers test ➢ endurance test ➢ current relays test ➢ calibration of current sensors...

Current Generator  Single-phase  600VA  AC  40V  15A

AC current generator 600VA 40V-15A 4 ranges

Réf : poc-600-cs/15a-40v/4g

• Linear technology
• Internal synthetizer to create a sinewave
• Two measurements systems: measure of the current and measure of the voltage
• Control made by a touchscreen width 5,7’’ for local control, and via RS232 or Ethernet for a remote control
• Possibility to create a three-phase current generator when the outputs are connected in star
• Can be used as an current amplifier because it includes a “Pilot” input and a current image output

Emulator  Single-phase  6000VA  DC  400V  120A

Emulator 6000W

Réf : pv-6000-abos-400v-120a-4g

Photovoltaic emulation source

Power Amplifier  Three-phase  120VA  AC  170V  0.1A

Voltage amplifier 8x15VA AC 170V 0.1A

Réf : pa-8x15-ac-170v-0.1a

• 8 voltage amplifiers are directly controlled by analogic outputs and by digital inputs and outputs from a standard board:
• One digital output is used for ON / OFF function for all the amplifiers,
• Eight analogic outputs are used to setup the output voltage of each amplifier independently of the others,
• Two digital inputs are used to read the status of the rack
• Linear technology provides a high stability and very short rise time and fall time.
• The eight outputs of the amplifiers are connected to the primary wiring of voltage transformers
• The outputs of the rack are insulated from each other and from case ground.

Power Amplifier  Single-phase  2000VA  AC-DC  270V  7.5A

Power Amplifier 2000VA

Réf : pa-2000-ac-dc-270v-15.4a-2g

• 4 quadrants power amplifier
• Operating in voltage regulation
• One insulated output
• Linear technology: high dynamics, very low distortion over a wide frequency band and bandwidth, power up to 4 times the rated power peaks, quick and easy integration for "Real time" or "Hardware In the Loop" applications in combination with simulators.
• Entirely self-sufficient with local control on touch screen, it can be controlled remotely from a supervisor system via Ethernet or RS232
• APPLICATIONS ➢ avionic networks 300-800-1200Hz ➢ industrial networks 50-60 Hz ➢ tests in accordance with standards ABD100.1.8 / MIL-STD-704 ➢ disturbed networks ➢ AC or DC motor simulation ➢ non-linear loads ➢ harmonics generation

Power Amplifier  Three-phase  30000VA  AC-DC  270V  37A

Power Amplifier 3x10kVA

Réf : pa-3x10000-ac-dc-4q-270v-37a

• 4 quadrants power amplifier
• 3 insulated outputs
• AC, AC+DC, DC
• Single-phase or three-phase
• Operating in voltage regulation
• Linear technology: high dynamics, very low distortion over a wide frequency band and bandwidth. This technology allows to provide power up to 4 times their rated power peaks and a quick and easy integration for "Real time" or "Hardware In the Loop" applications in combination with simulators
• Entirely self-sufficient with local control on touch screen. Or remote control from a supervisor system via Ethernet or RS232
• The addition of a "resistive load" allows increasing from 30% to 100% its absorption capacity for use as alternative or continuous load
• APPLICATIONS ➢  avionic network 300-800-1200Hz ➢ industrial networks 50-60 Hz ➢ tests in accordance with ABD100.1.8 / MIL-STD-704 ➢ disturbed networks ➢ AC or DC motor simulation ➢ non-linear loads ➢ harmonics generation

Power Amplifier  Three-phase  21000VA  AC-DC  400V  54A

Power Amplifier 3x7kVA

Réf : pa-3x7000-ac-dc-4q-400v-54a-4g

• 4 quadrants three-phase power amplifier
• Current regulation
• Linear technology allows to provide power peaks up to 4 times its nominal power during 20 ms, an easy integration for “Real-Time” or “Power Hardware In the Loop” applications with simulators, an instantaneous quadrant changes from operation as generator, power factor +1, to operation as a load, power factor -1
• Entirely self-sufficient with its local control on touchscreen, it can also be controlled remotely from a supervisor system via Ethernet or RS232
• APPLICATIONS ➢ AC or DC grids ➢ motor emulation / AC-AC AC-DC or DC-DC converters ➢ harmonics generation

 

Download here the catalog of our Amplifiers

Power Amplifier  Three-phase  9000VA  AC-DC  360V  17A

Power Amplifier 3x3kVA

Réf : pa-3x3000-ac-dc-360v-17a-4q-2g

• 4 quadrants three-phase power amplifier
• Operating in voltage regulation or in current regulation
• The linear technology used for these amplifiers allows:
• To provide power peaks up to 4 times its nominal power during 20 ms
• An easy integration for “Real-Time” or “Power Hardware In the Loop” applications with simulators
• An instantaneous quadrant changes from operation as generator, power factor +1, to operation as a load, power factor -1
• Entirely self-sufficient with its local control on touchscreen, they can be controlled remotely from a supervisor system via an Ethernet or RS232 link for easy integration in a complex test system
• APPLICATIONS ➢ AC or DC network simulation ➢ motor emulation / AC-AC AC-DC or DC-DC converters

 

 

Power Amplifier  Three-phase  9000VA  AC-DC  260V  24A

Power Amplifier 3x3kVA

Réf : pa-3x3000-ac-dc-260v-24a-4q-2g

Power Amplifier  Three-phase  9000VA  AC-DC  200V  17A

Power Amplifier 3x3kVA

Réf : pa-3x3000-ac-dc-200v-17a-4q-ui

Power Amplifier  Three-phase  6000VA  AC-DC  270V  8.4A

Power Amplifier 3x2kVA

Réf : pa-3x2000-ac-dc-270v-8.4a-4q

Power Amplifier  Three-phase  3000VA  AC-DC  260V  7.7A

Power Amplifier 3x1kVA

Réf : pa-3x1000-ac-dc-260v-7.7a-4q

Power Amplifier  Three-phase  2250VA  AC  300V  5A

Power Amplifier 3x750VA

Réf : pa-3x750-ac-300v-5a-3g

Power Amplifier  Single-phase  24000VA  AC-DC  400V  185A

Power Amplifier 24kVA

Réf : pa-24000-ac-dc-400v-185a-4g

Power Amplifier  Single-phase  20000VA  AC-DC  400V  154A

Power Amplifier 20kVA

Réf : pa-20000-ac-dc-400v-154a-4g

Power Amplifier  Single-phase  15000VA  AC-DC  400V  115A

Power Amplifier 15kVA

Réf : pa-15000-ac-dc-400v-115a-4g

• 4 quadrants one-phase power amplifier
• Operating in voltage regulation or in current regulation
• The linear technology used for these amplifiers allows:
• To provide power peaks up to 4 times its nominal power during 20 ms
• An easy integration for “Real-Time” or “Power Hardware In the Loop” applications with simulators
• An instantaneous quadrant changes from operation as generator, power factor +1, to operation as a load, power factor -1
• This device can be used either as an amplifier of an external pilot signal or as a power supply when using its internal synthetizer
• Entirely self-sufficient with its local control on touchscreen, they can be controlled remotely from a supervisor system via an Ethernet or RS232 link for easy integration in a complex test system
• APPLICATIONS ➢ AC or DC grids simulation ➢ motor emulation / AC-AC AC-DC or DC-DC converters ➢ solar array simulation

Power Amplifier  Single-phase  6000VA  AC-DC  270V  22A

Power Amplifier 6000VA

Réf : pa-6000-ac-dc-270v-22a-ui

• 4 quadrants one-phase power amplifier
• Operating in voltage regulation or in current regulation
• The linear technology used for these amplifiers allows:
• To provide power peaks up to 4 times its nominal power during 20 ms
• An easy integration for “Real-Time” or “Power Hardware In the Loop” applications with simulators
• Entirely self-sufficient with its local control on touchscreen, they can be controlled remotely from a supervisor system via an Ethernet or RS232 link for easy integration in a complex test system

Power Amplifier  Single-phase  6000VA  AC-DC  130V  50A

Power Amplifier 6000VA

Réf : pa-6000-ac-dc-130v-50a-ui

• 4 quadrants one-phase power amplifier
• Operating in voltage regulation or in current regulation
• The linear technology used for these amplifiers allows:
• To provide power peaks up to 4 times its nominal power during 20 ms
• An easy integration for “Real-Time” or “Power Hardware In the Loop” applications with simulators
• Entirely self-sufficient with its local control on touchscreen, they can be controlled remotely from a supervisor system via an Ethernet or RS232 link for easy integration in a complex test system

Power Amplifier  Single-phase  3000VA  AC-DC  360V  17A

Power Amplifier 3000VA

Réf : pa-3000-ac-dc-360v-17a-2g

Power Amplifier  Single-phase  3000VA  AC-DC  260V  24A

Power Amplifier 3000VA

Réf : pa-3000-ac-dc-260v-24a-2g

Real 4 quadrants power amplifier operating in voltage regulation or in current regulation:
Linear technology allows:

• To provide power peaks up to 4 times its nominal power during 20 ms
• An easy integration for “Real-Time” or “Power Hardware In the Loop” applications with simulators
• An instantaneous quadrant changes from operation as generator, power factor +1, to operation as a load, power factor -1

Entirely self-sufficient with its local control on touchscreen, they can be controlled remotely from a supervisor system via an Ethernet or RS232 link for easy integration in a complex test system.

Power Amplifier  Single-phase  3000VA  AC-DC  200V  17A

Power Amplifier 3000VA

Réf : pa-3000-ac-dc-200v-17a-2g-ui

Power Amplifier  Two-phase  900VA  AC-DC  900V  2A

Power Amplifier 2x450VA

Réf : pa-2x450-ac-dc-900v-2a-4q-4g

• Real double 4 quadrants AC + DC amplifier with high electric performance
• To test or simulate all kinds of generators or loads with high dynamics, it has a very low distortion and a high bandwidth.
• Linear technology to allow a quick and easy integration for "Real time" or "Hardware In the Loop" applications in combination with simulators.
• Easy insertion in a 19 inches rack, its input and output connections are disposed on front and on rear panel.
• Remote control over Ethernet or RS232 allows its easy integration into an automatic test system.

Power Load  Single-phase  50000VA  DC  900V  125A

Power Load 50kW

Réf : ac-0209

• Static load bench 270 VDC / 50kW
• Thre operating ranges:
• 2x270V-28.5kW 
• 1x540V-57kW 
• 1x270V-57kW 
• Response time: 200 ms approx.

Power Load  Single-phase  6000VA  DC  400V  100A

Power Load 6000W

Réf : rc-2056

• Two current ranges :
• Range 40 A: current from 0 to 40,0 ADC
• Range 400 A: current from 0 to 400,0 ADC
• Max programmable voltage: 100 V
• Max programmable power: 16 kW
• Linear technology
• Resistance, current or power programming
• High electrical performances allow to meet  the requirements of the materials integrated into automatic test systems

Power Load  Single-phase  6000VA  DC  500V  50A

Power Load 6000W

Réf : rc-2035

• Two current ranges :
• Range 5 A: current from 0 to 5,0 ADC
• Rangee 50 A: current from 0 to 50,0 ADC
• Max programmable voltage: 500V
• Max programmable power: 15 kW
• Permanent tolerated power: 6 KW

Power Load  Single-phase  3000VA  DC  60V  300A

Power Load 3000W

Réf : pl-3000-dc-60v-300a-2g-r

• Linear technology
• Digitally controlled
• Programmable in resistance, voltage, current, impedance or power
• High electrical performances meet the requirements of the products integrated into automatic test systems
• Fully self-sufficient, the load can be remotely controlled via Ethernet, RS232 or RS485
• Dynamic loads with “HP” option have an additional absorption capacity of 50%. Their dimensions are the same as standard models
• APPLICATIONS ➢ battery discharge ➢ current peaks ➢ sequences from 1 ms to several days

Power Load  Single-phase  2000VA  DC  60V  120A

Power Load 2000W

Réf : pl-2000-dc-60v-120a-2g

Power Load  Single-phase  50000VA  AC  230V  250A

Power Load 50kVA

Réf : power-load-50kva

• 115-230 VRMS / 50kW static load bench
• Three power ranges to meet load requirements of  115-230 VRMS networks
• 115V-28.5kW (one block)
• 230V-57kW (two blocks in series)
• 115V-57kW (two blocks in parallel)
• AUTO (115V/230V-57kW), automatic ranges selection
• Response time: 200 ms approx. 
• Network: three phases (3 Phases + Neutral + Earth)
• Input voltage: 400 VRMS +6% -10%
• Input frequency: from 45 Hz to 55 Hz
• Input current: 2,5 Aeff approx.

Power Load  Two-phase  18000VA  AC  115V  26A

Power Load 2x9000VA

Réf : ac0218

• 2 channels load bench 115V - 300/1000HZ
• APPLICATION : aircraft network

Power Load  Single-phase  15000VA  AC-DC  230V  130A

Power Load 15kVA

Réf : pa-15000-l-130a-230v

• AC load bench
• Excellent characteristics of accuracy, bandwidth, low distortion and immunity to the network
• The linear technology allows its use at full power for a power factor between -0.8 and -1
• Remote control using an IEEE488.2 link, optional Ethernet, allows easy integration into an automatic test system
• APPLICATIONS ➢ laboratory and test applications ➢ load emulation ➢ network qualification ➢ tests according to ABD100.1.8 / MIL-STD-704 / AIR2021 ➢ integrated power analyzer ➢ non-linear loads ➢ Harmonics generation 

Power Supply  Two-phase  36000W  DC  90V  200A

Power Supply 36000W

Réf : power-supply-36000w-dc-90v-200a-hp

• This DC power supply is using a linear power block which mix high accuracy and high dynamic performances, including for severe loads like capacitor, inductance, PWM…
• Thanks to their linear technology, it produces no electrical disturbances and can be used in anechoic chambers. This linear technology allows to generate up to 4 times their rated power during
• 30 ms and 3 times during 3 s.
• As all our DC power supplies, this one is “2-quadrants” and has a very short rise-time and falltime.
• This ensure a perfect tracking of programmed voltage including on capacitive loads (current absorption).
• The output is insulated from mains and from case ground: several power supplies can be connected in-series to increase output voltage

• APPLICATIONS
  ➢ DC Aeronautic network
  ➢ Automotive network
  ➢ All kind of DC loads
  ➢ Current generator

Power Supply  Single-phase  7800W  DC  65V  120A

Power Supply 7800W

Réf : power-supply-7800w-dc-65v-120a

• This DC power supply is 2 quadrants and operates in  voltage regulation with current limitation:
• Its analogic input receives a “Piot” signal with amplitude 0~±10 V peak coming from its internal synthetizer or from an external device,
• Two analogic outputs insulated from power output return images of voltage and current with an amplitude of 0~±10 V peak.
• The linear technology of this power supply allows:
• To provide power pics up to 4 times its rated power during 20 ms
• An easy integration for “Real Time” or “Power Hardware In the Loop” simulation in association with simulators using its “Pilot” input and its “Image” outputs,
• An instantaneous transition between quadrants “Source” and “Sink”.
• The output is floating, insulated from mains and from case ground. This allows to connect one output pole, “+” or “0V” to earth.
• Entirely self-sufficient with its local control on touchscreen, they can be controlled remotely from a supervisor system via an Ethernet, ModBus TCP or RS232 link.
• APPLICATIONS
• High accuracy current generator
• High accuracy voltage generator
• Operating on inductive loads
• Charge and discharge of batteries or supercapacitors
• Current reversible to operate as a DC load at full power

Power Supply  Three-phase  1800VA  AC  270V  4.5A

Power supply 3x600VA

Réf : power-supply-ac-3x600va-270v-4.5a

• AC three-phase voltage source built with power blocks in linear technology for high accuracy and dynamics
• Controlled by digital synthesizer to create waveforms with harmonics up to the order 500.
• Almost no electrical pollution thanks to the linear technology, this AC power supply can be used in anechoic chambers.
• Its fast regulation ensures stability even for severe and deforming loads (motor, inductance, rectifiers)
• 2 Quadrants power supply: can be used in generation of single-phase or three-phase network, but also in single-phase or three-phase load (current absorption)
• Entirely self-sufficient through their control / command card by touch screen, they can also be controlled remotely for an easy integration into an automatic system using the TCP/IP Protocol on Ethernet or SCPI on RS232.
• APPLICATIONS

• Single or three phases 115VRMS aircraft networks
• Tests according to DO-160, ABD100.1.8, MIL-STD-704:
• Waveforms are downloaded in the power supplies
• Software is available to create and modify sequences and waveforms

Power Supply  Single-phase  2000VA  AC  450V  12A

Power Supply 2000VA

Réf : ps-2000-ac-450v-12a-3g

• AC power supply
• Linear technology for high accuracy and dynamics
• Controlled by a digital synthesizer to create waveforms with high harmonics
• Almost no electrical pollution
• Their fast regulation ensures stability even for severe and deforming loads (motor, inductance, rectifiers)
• 2 Quadrants: they can be used in generation of single-phase or three-phase network, but also in single-phase or three-phase load (current absorption)
• Entirely self-sufficient through their control card by touch screen, they can also be controlled remotely for an easy integration into an automatic system using the TCP/IP Protocol on Ethernet or SCPI on RS232
• Robust and reliable: with permanent measurement of voltage, current, temperature of elements of power, these power supplies are tolerant to short-circuit and other severe conditions of use, they are particularly suitable for a laboratory use

Power Supply  Single-phase  4000VA  DC  100V  40A

Power Supply 4000W

Réf : ps-4000-dc-100v-40a

• Linear technology: high accuracy and high dynamic performances, including for severe loads like capacitor, inductance, PWM…
• Thanks to their linear technology, they produce no electro-smog and can be used in anechoic chambers.
• This linear technology allows to generate up to 4 times their rated power during 20 ms and 3 times during 100 ms.
• The DC power supplies are 2-quadrants and have very small rise-time and fall-time. This ensure a perfect tracking of programmed voltage including on capacitive loads (current absorption).
• The output is insulated from mains and from case ground: several power supplies can be connected in-series to increase output voltage.
• For a maximal security use, the power supplies are equipped with several protection devices:
• Protection against overvoltage, overcurrent, short-circuit on output
• Protection against overheating using an automatic circuit
• Entirely self-sufficient with its local control on touchscreen, they can be controlled remotely from a supervisor system via an Ethernet or RS232 link for easy integration in a complex test system
• APPLICATIONS ➢ DC aeronautic network ➢ automotive network ➢ all king of DC loads

Power Supply  Single-phase  1000VA  DC  100V  10A

Power Supply 1000W

Réf : ps-1000-dc-100v-10a

Power Supply  Single-phase  600VA  DC  100V  6A

Power Supply 600W

Réf : ps-600-dc-100v-6a

Power Supply  Three-phase  15000VA  AC  400V  40A

Power Supply 3x5000VA

Réf : ps-3x5000-ac-400v-40a

Power Supply  Three-phase  9000VA  AC  180V  26A

Power Supply 3x3000VA

Réf : ps-3x3000-ac-180v-26a

Power Supply  Three-phase  6000VA  AC  135V  15A

Power Supply 3x2000VA

Réf : ps-3x2000-ac-135v-15a

• Power blocks are built in linear technology for high accuracy and dynamics
• Controlled by digital synthesizer to create waveforms with harmonics up to the order 500.
• Almost no electrical pollution thanks to the linear technology, our AC power supplies can be used in anechoic chambers. Their fast regulation ensures stability even for severe and deforming loads (motor, inductance, rectifiers).
• These “2 Quadrants” power supplies can be used in generation of single-phase or threephase network, but also in single-phase or three-phase load (current absorption).
• The isolated 0~±10V analog outputs, voltage image and current image, allow to use them with an acquisition unit, for example to record qualification tests.
• Entirely self-sufficient through their control / command card by touch screen, they can also be controlled remotely for an easy integration into an automatic system using the TCP/IP Protocol on Ethernet or SCPI on RS232
• Provided with OPS1 and OPS3 software designed by Puissance+, the users can create waveforms and sequences to run qualification tests according to D0-160, ABD100-1.8 or MILSTD-704 Standards.
• Robust and reliable: with permanent measurement of voltage, current, temperature of elements of power, these power supplies are tolerant to short-circuit and other severe conditions of use, they are particularly suitable for a laboratory use.

Power Supply  Three-phase  3000VA  AC  270V  3.7A

Power Supply 3x1000VA

Réf : ps-3x1000-ac-270v-3.7a

• APPLICATIONS :
• Single or three phases 115VRMS aircraft networks
• Tests according to DO-160, ABD100.1.8, MIL-STD-704: 
• Waveforms are downloaded in the power supplies 
• Software is available to create and modify sequences and waveforms

Power Supply  Single-phase  6000VA  AC  260V  600A

Power Supply 6000VA

Réf : ps-6000-ac-600a-260v

• The AC generator “POC-PS-6000” is built using a power bloc in linear technology and a current regulation or a voltage regulation. It is suitable for any application that requires an accurate and stable output, including when there is a load impedance variation.
• Thanks to the linear technology, it generates almost no electrical pollution and can be used in anechoic chamber.
• Its 0-24V insulated digital bus allow a use directly controlled by a PLC on a production line.
• To ensure a high precision on its entire output range, this generator is composed of a power amplifier and an output transformer.
• Entirely self-sufficient thanks to its touch-screen control / command card, it also can be remotely controlled for an easy integration into an automatic system using the TCP/IP Protocol on an Ethernet link, or SCPI on a RS232 link.
• APPLICATIONS ➢ Normative tests of breakers ➢ Endurance tests ➢ Current relays tests ➢ Calibration of current sensors and wattmeter ➢ Generation of magnetic field

Power Supply  Single-phase  3000VA  AC  180V  27A

Power Supply 3000VA

Réf : ps-3000-ac-180v-27a-2g

Power Supply  Single-phase  1000VA  AC  260V  9A

Power Supply 1000VA

Réf : ps-1000-ac-260v-9a

Power Supply  Single-phase  900VA  AC-DC  900V  2A

Power Supply 900VA

Réf : ps-900-ac-dc-900v-10a-4g

Power Supply  Single-phase  600VA  AC  300V  2A

Power Supply 600VA

Réf : ps-600-ac-300v-2a-2g